How to Solve the Error Codes in Canon Printer?
Canon printers have been marked as one of those devices which have provided the users with stability in their business and excellent modification with the data. These printers take the system data and produce a paper record so that the user has an alternative option with the inner operational system. But often while working on the device, the user comes across several Canon Printer errors which become an obstacle in the functioning of its operation. Hence below are some of the most common mistakes mentioned in the solutions for the same, so that the user can solve them before contacting the Canon Helpline number, the errors are:
Fixing the Canon Printer error:
It is entirely conceivable that the user might encounter error codes or messages if they have installed Canon Printer. There is no doubt, these printers are reliable and efficient, but the main thing that is to be directed is on how to rectify Canon error? Here are some of the steps which the user can follow while fixing them
Canon error b200:
Cause:
Canon b200 error happens typically when the printer has used several formulas of ink. One great example is when the user replaces or refill a cartridge with low printing equipment that has an unsatisfactory toner quality and degrades the state is where this error arrives.
Fix
- To fix canon printer error b200, switch off the printer and unplug from the power socket.
- Start the printer cover to show the ink cartridges.
- Thoroughly remove the print head from the printer. Check with utmost caution to withdraw destroying of the system
- Wipe the print head along with the ink cartridges.
- Brush the connection pads with a contact disinfectant or a nice old pencil eraser.
- Reinstall the print head and run the “Auto Head Alignment” test print.
Canon E05
Cause:
The Canon E05 fault happens when the printer has difficulty with one of the ink cartridges, the easy solution to this issue is when the user presses the button and stop/reset or cancels the printer for about 15 seconds, then this will begin a process like printing, but in reality, it will reset the printer. Therefore to solve this Canon printer problem the user can follow these steps:
Fix
- One solution which the user can follow is resetting the printer or rebooting it for some time.
- The user can reinstall the system or clear a blockage by reinstalling the cartridge. Open the top cover from the top of the Canon Printer.
- Tap the two click-locks found at the surfaces of the cartridge holder, and the ink cartridge will pop-out.
- Now, mark the cartridge if it has any particles, or have dried ink in its hole that could be creating the blockage.
- Tidy up the cartridges by tissue and re-install the ink cartridge in its holder.
- If the error still occurs, then you need to replace the ink cartridge.
- The user should replace the ink cartridge
Canon E02
Cause:
The Canon E02 error might point to be for many various things, but mainly it’s a problem with the print head overheating. There is a different solution to fix this difficulty like remove and substituting print head, restore the cartridge, reset print head and turn off the printer and remove the print cover.
Fix
- Canon printer troubleshooting issues the fixing of E02 error. The user has to start by turning off the printer and then opening the print head
- Turn the printer back on the cartridges would begin moving to the left. Before the cartridges transfer the left side, shut down the printer cover and run the printer to turn on.
- The user can also turn off the printer and turn it off for a minute.
- Turn the printer back on and verify if the query has resolved
Canon error 6000
Cause:
Canon printer error 6000 indicates that there is a difficulty with the line feed. There are 3 primary causes for this error. The line feed is either damaged or smeared, or it might have some small particles in the drive.
Fix
- Unplug the printer from the outlet and then plug the power cord back on after some time.
- Hold the “power” button for some seconds and then press the “stop” button twice.
- Redo the procedure one more time. This point, slowly release the “power” button and tap the “stop” button four times.
- For a defective printer section, replace the faulty component. The broken parts will incorporate one or more than several units
These are some of the errors which are faced by the user while working on Canon Printers. If the user still has an issue with them then they can contact the Canon Customer Support number at a time they want. The professionals would provide with a detailed version of the solution.
